"AireHaven - How it Works"

Source Control
AireHaven chooses to control the largest source of dirty air through simple engineering principles.
Our solution "Cleans the air before it enters the room."
How it Works

Continuous Positive Pressure/Ventilation
"The solution is through dilution" process means the entire room becomes full of clean air (not just an area around the unit!). Clean water from the faucet is like clean air from the air purifier. In a short time, the water in the pot becomes clear and, likewise, the air in a room becomes purified. Cleaned air is directed and exits the room through the doorway ( like water overflows from the pot) and uncleaned hallway air is prevented from drifting into the room.
Achieve the results you want:
The air coming from the ductwork and furnace must be cleaned before it enters the room. Contaminants collect and grow in your furnace and duct work, and furnace filters don't address this. It's clearly important to clean the warm or cool air before it enters your room by installing the air purifier over the register. The air purifier keeps the air in the room continuously clean by preventing the cloud of contaminants from entering the room each time the forced air system cycles "on."
* AireHaven has 2 air inlets. One is placed over a floor or ceiling register ( with an adaptor) and will receive and clean all the air before it enters the room. The other air inlet is a room air inlet.
* The unit has multiple fan speeds and damper positions required to pull more air from a single register than is normally delivered by several registers. All other registers in the room must be shut off to prevent unclean air from entering the room.
* The unit senses room air temperature and the temperature of the air in the register and ductwork.
* A control module set to a desired room temperature by the operator continuously compares temperature sensor data and adjusts fan speed and damper positions to maintain a pleasant room temperature by acting each time the forced air system provides needed cool or heated air.
* The AireHaven unit will always draw, clean and supply some air from the register which "overfills" the room with clean air that will flow through the doorway and prevent uncleaned hallway air from migrating into the "cleaned" room.
* Room air, cleaned once, may also be drawn to and through the unit's room air inlet for additional scrubbing. Particulate Matter 2.5 (PM 2.5 microns) and smaller particulates can stay aloft for hours in a room. They can be pulled into the unit's room air inlet for capture before they settle to the floor. Once the room is clean, AireHaven works to keep it clean and comfortable.
AireHaven is Patented.